Guitar
I decided to put one or two good pickups in the testbed guitar. My original idea was that it should be kept playable at all time. But I was too busy trying out my flat pickups to get a proper pickup mounted. I hoped that I would make a pickup that sounded great, but I'm not sure if I'm satisfied with their sound (more on that later).
I needed a good pickup for the guitar to sound decent, but also to have a sort of reference: something to compare with when trying out the various pickups. I decided to go for a couple of Seymour Duncan pickups, I bought for my first T-beam project, but later put in my strat.
The pickups are wider than the T-beam, so in order to fit them in, I had to cut through the sides of the steel box profile. That was easily done with an angle grinder (my favourite tool these days, with cutting disc as well as flapdisc for shaping wood).
So far, so good. Unfortunately, that put quite a bow in the box profile. I didn't count on that (only thought wood behaved that way), but I suppose that's part of learning.
That's put rather a halt to my progress. I'll make some brackets and beams to straighten and support the box profile in its weakened state. I was going to make pickup holders anyway, but now they're also going to add strength.
Btw, I'm condidering this oil bluing process for the box profile. And, I'm making some mahogany forearm and thight supports (and a strap horn), so I can ditch the acrylic body, that I've grown a bit tired of.
- Even Further Progress
The two-layer neck guitar is progressing further. Now, it's a very nice, compact and well-sounding instrument. There are still improvements to be made, but now that it's playable, I hope to play more and modify less. The neck is very flat...
- Truly Headless
After postponing it a number of times, I cut off the strat headstock of my very fine Warmoth neck. That took a bit of self persuation, but I needed it headless. A brass angle bracket is holding the strings. I also made a new acrylic body. This time, I...
- Mahogany Sides For The T-beam
Almost a year ago I mentioned the mahogany sides that I was going to make for the two string T-beam bass. They're coming along slowly, but they're far enough to be shown here. The main thing is the added mahogany sides. But another thing I've...
- Stick Bass Pictures
I've made the spine of the two-string, nylon string, fretless piezo alu T-beam stick bass. Now I have to stick some wood and some piezo pickups on it. Some photos: I will shorten bot ends of the T-beam down to the tuners and string holes. Btw, these...
- In The Meantime...
It's been a while since my last update. This is primarily due to other, more pressing tasks in life. I haven't done any work on the T-beam guitar, except from a lot of thinking. In the meantime, I've made a modification to my old Squier Strat....
Guitar
Room for pickups
I decided to put one or two good pickups in the testbed guitar. My original idea was that it should be kept playable at all time. But I was too busy trying out my flat pickups to get a proper pickup mounted. I hoped that I would make a pickup that sounded great, but I'm not sure if I'm satisfied with their sound (more on that later).
I needed a good pickup for the guitar to sound decent, but also to have a sort of reference: something to compare with when trying out the various pickups. I decided to go for a couple of Seymour Duncan pickups, I bought for my first T-beam project, but later put in my strat.
The pickups are wider than the T-beam, so in order to fit them in, I had to cut through the sides of the steel box profile. That was easily done with an angle grinder (my favourite tool these days, with cutting disc as well as flapdisc for shaping wood).
So far, so good. Unfortunately, that put quite a bow in the box profile. I didn't count on that (only thought wood behaved that way), but I suppose that's part of learning.
That's put rather a halt to my progress. I'll make some brackets and beams to straighten and support the box profile in its weakened state. I was going to make pickup holders anyway, but now they're also going to add strength.
Btw, I'm condidering this oil bluing process for the box profile. And, I'm making some mahogany forearm and thight supports (and a strap horn), so I can ditch the acrylic body, that I've grown a bit tired of.
- Even Further Progress
The two-layer neck guitar is progressing further. Now, it's a very nice, compact and well-sounding instrument. There are still improvements to be made, but now that it's playable, I hope to play more and modify less. The neck is very flat...
- Truly Headless
After postponing it a number of times, I cut off the strat headstock of my very fine Warmoth neck. That took a bit of self persuation, but I needed it headless. A brass angle bracket is holding the strings. I also made a new acrylic body. This time, I...
- Mahogany Sides For The T-beam
Almost a year ago I mentioned the mahogany sides that I was going to make for the two string T-beam bass. They're coming along slowly, but they're far enough to be shown here. The main thing is the added mahogany sides. But another thing I've...
- Stick Bass Pictures
I've made the spine of the two-string, nylon string, fretless piezo alu T-beam stick bass. Now I have to stick some wood and some piezo pickups on it. Some photos: I will shorten bot ends of the T-beam down to the tuners and string holes. Btw, these...
- In The Meantime...
It's been a while since my last update. This is primarily due to other, more pressing tasks in life. I haven't done any work on the T-beam guitar, except from a lot of thinking. In the meantime, I've made a modification to my old Squier Strat....