Guitar
guitarz.blogspot.com:
Apologies for the sub-standard photo, but this was the only one that showed the entire length of the guitar in question face on.
The eBay seller claims that this 1960s Burke electric guitar in metallic burgundy finish was the very first electric guitar to feature an aluminium neck and was thus the forerunner to Wandre, Veleno, Travis Bean, et al. Apparently Glen F. Burke patented the design in 1961. Whether the patent was for the concept of an aluminium neck or if it was for the entire design of the guitar, we are not told; I suspect the latter.
The aluminium neck runs all the way through the body to the end strap button, so it's actually an aluminium neck and centre block with pickups and bridge sitting upon it. The fingerboard is rosewood and the body itself is maple and is hollow, no doubt contributing to the instruments allged "acoustic tone". The body shape is most peculiar, looking as if a symmertical design had been sawn down the middle and one half flipped over. (In fact, I am reminded of this).
The pickguard is odd in that it has no screws mounting it to the body, but instead is kept in place by the pots for the controls, which are comprised of a volume and tone for each pickup, and a 3-way pickup selector.
This guitar is currently listed on eBay with a Buy It Now price of $10,000.
Thanks to Jeffrey Jones and to Dirk Lubbe who both emailed me about this guitar.
G L Wilson
© 2011, Guitarz - The Original Guitar Blog - now in its 10th year!
- Aristides Oio Aluminum Guitar
guitarz.blogspot.com: I love aluminium guitars. I was after an aluminium Strat body a while back but it fell through. Still, I did manage to snag a nice Tokai Talbo last year (the same actual one, coincidently, featured on these very pages a couple of...
- 1960s Mr. Peters Batwing Guitar With The Patented Sceusa Assymetrical Neck
guitarz.blogspot.com: The most immediately obvious design element of this 1960s single pickup electric guitar from Mr. Peters Guitar Mfg. in Santa Ana, California is the Batwing shape on the treble side of the body. However that is not the feature that...
- Wandre Doris: An Eccentric 1960s Italian Original
guitarz.blogspot.com: Wandre Guitars were designed by Wandre Pioli (1926-2004) and built in his factory in Cavriago from 1959 to 1969. The Wandre Doris is a beautifully eccentric example, featuring Wandre's aluminium neck covered in polystyrene coating....
- Alternatives To The T-beam
I've tried quite a lot of places to get the crucial component, the T-beam. It is more difficult than I originally expected. I've tried a couple of scrap metal dealers and the leading Danish metal distributor. Plus a couple of web-based stores....
- Background - Why And How
Over the last years, I've become more and more interested in building guitars rather than (just) playing them. I never got around to actually building anything, but I took a couple of guitars apart and put them together again. I also discovered, that...
Guitar
Burke, USA-made, aluminium-necked electric guitar, design patented in 1961
guitarz.blogspot.com:
The eBay seller claims that this 1960s Burke electric guitar in metallic burgundy finish was the very first electric guitar to feature an aluminium neck and was thus the forerunner to Wandre, Veleno, Travis Bean, et al. Apparently Glen F. Burke patented the design in 1961. Whether the patent was for the concept of an aluminium neck or if it was for the entire design of the guitar, we are not told; I suspect the latter.
The aluminium neck runs all the way through the body to the end strap button, so it's actually an aluminium neck and centre block with pickups and bridge sitting upon it. The fingerboard is rosewood and the body itself is maple and is hollow, no doubt contributing to the instruments allged "acoustic tone". The body shape is most peculiar, looking as if a symmertical design had been sawn down the middle and one half flipped over. (In fact, I am reminded of this).
The pickguard is odd in that it has no screws mounting it to the body, but instead is kept in place by the pots for the controls, which are comprised of a volume and tone for each pickup, and a 3-way pickup selector.
This guitar is currently listed on eBay with a Buy It Now price of $10,000.
Thanks to Jeffrey Jones and to Dirk Lubbe who both emailed me about this guitar.
G L Wilson
© 2011, Guitarz - The Original Guitar Blog - now in its 10th year!
- Aristides Oio Aluminum Guitar
guitarz.blogspot.com: I love aluminium guitars. I was after an aluminium Strat body a while back but it fell through. Still, I did manage to snag a nice Tokai Talbo last year (the same actual one, coincidently, featured on these very pages a couple of...
- 1960s Mr. Peters Batwing Guitar With The Patented Sceusa Assymetrical Neck
guitarz.blogspot.com: The most immediately obvious design element of this 1960s single pickup electric guitar from Mr. Peters Guitar Mfg. in Santa Ana, California is the Batwing shape on the treble side of the body. However that is not the feature that...
- Wandre Doris: An Eccentric 1960s Italian Original
guitarz.blogspot.com: Wandre Guitars were designed by Wandre Pioli (1926-2004) and built in his factory in Cavriago from 1959 to 1969. The Wandre Doris is a beautifully eccentric example, featuring Wandre's aluminium neck covered in polystyrene coating....
- Alternatives To The T-beam
I've tried quite a lot of places to get the crucial component, the T-beam. It is more difficult than I originally expected. I've tried a couple of scrap metal dealers and the leading Danish metal distributor. Plus a couple of web-based stores....
- Background - Why And How
Over the last years, I've become more and more interested in building guitars rather than (just) playing them. I never got around to actually building anything, but I took a couple of guitars apart and put them together again. I also discovered, that...