Guitar
I've tried quite a lot of places to get the crucial component, the T-beam. It is more difficult than I originally expected. I've tried a couple of scrap metal dealers and the leading Danish metal distributor. Plus a couple of web-based stores. No success yet. It's quite disappointing, especially since I thought that obtaining the T-beam would be the easiest part of the project.
Until I find the T-beam - *if* I ever do - I've been contemplating other shapes of aluminium for the "spine" of the guitar. One possibility is an aluminium flat bar, 100 mm wide and 20 mm (approximately 4 and 0,8 inches) thick. With it, I could make the neck in aluminium only (as opposed to the T-beam version, where the neck sides are wood).
It would look clean and probably give a more pure aluminium sound. It would also be very thin. But it would imply a much larger amount of metalworking than I'm comfortable with. Plus, it would be quite heavy. Good thing it's headless, otherwise it would probably be very neck heavy.
Perhaps worst of all, I'd have to abandon the feature you see on the back of the T-beam versions: A flange of metal sandwiched between wood. I had (or have... I haven't yet given up on finding a T-beam) great expectations for the looks of this particular detail, which would resemble old sports cars' steering wheels ...as well as some knife handles with the blade going through it.
The principle of making a full-aluminium neck that extends down to the bridge is not at all original. The guitar would more or less be a headless version of instruments like Electrical Guitar Company's Custom Guiar - which in turn seems to be based on earlier Travis Bean models, though it seems that the former has a wider piece of aluminium for the body, ensuring greater strength as the pickup holes do not completely intersect the aluminium piece.
The lack of originality takes some of the fun out of the project, but still, with headless neck and an ergonomic and very thin body, it still distinguishes itself enough from existing guitars to allow me to feel just a little like a pioneer.
Next week I plan to visit yet another scrap metal dealer. There might be a T-beam waiting for me there.
- Two-layer Aluminium Neck
Among the drawbacks of my old T-beam designs were the lack of a truss rod or similar system to control the bow of the neck. A way to help this - but still use stock aluminium beam for the guitar - could be having a neck in two layers - an upper flat beam,...
- Future Project
Here's an instrument which I'd like to make some day: Three string blues slide guitarFor playing seatedSliding nutNo strapSpine: 30 X 12 mm aluminium rectangular beam - freely vibrating Piezo pickup on aluminium beamSliding pickup under strings-...
- To-do List - Status
I am having slow progress on the T-beam bass (remember the to-do list?). I have carved out the curves for neck and body on the aluminium beam using hacksaw and file. There is still some filing to do before I mount the mahogany sides, which will also have...
- The Desired Design Expression Of The T-beam Guitar
Very early in the design process, I've had a quite clear idea of what the T-beam guitar will look like. I expect the combination of wood and aluminium to result in a very classic look. Not classic in the guitar sense, but rather in an automotive sense....
- Making My Own T-beam
As mentioned earlier, I've had an unexpected hard time finding a suitable T-beam. There are lots of them available, but none wide enough for me to make holes for the pickups without intersecting the top flange completely. For now, I have given...
Guitar
Alternatives to the T-beam
I've tried quite a lot of places to get the crucial component, the T-beam. It is more difficult than I originally expected. I've tried a couple of scrap metal dealers and the leading Danish metal distributor. Plus a couple of web-based stores. No success yet. It's quite disappointing, especially since I thought that obtaining the T-beam would be the easiest part of the project.
Until I find the T-beam - *if* I ever do - I've been contemplating other shapes of aluminium for the "spine" of the guitar. One possibility is an aluminium flat bar, 100 mm wide and 20 mm (approximately 4 and 0,8 inches) thick. With it, I could make the neck in aluminium only (as opposed to the T-beam version, where the neck sides are wood).
It would look clean and probably give a more pure aluminium sound. It would also be very thin. But it would imply a much larger amount of metalworking than I'm comfortable with. Plus, it would be quite heavy. Good thing it's headless, otherwise it would probably be very neck heavy.
Perhaps worst of all, I'd have to abandon the feature you see on the back of the T-beam versions: A flange of metal sandwiched between wood. I had (or have... I haven't yet given up on finding a T-beam) great expectations for the looks of this particular detail, which would resemble old sports cars' steering wheels ...as well as some knife handles with the blade going through it.
The principle of making a full-aluminium neck that extends down to the bridge is not at all original. The guitar would more or less be a headless version of instruments like Electrical Guitar Company's Custom Guiar - which in turn seems to be based on earlier Travis Bean models, though it seems that the former has a wider piece of aluminium for the body, ensuring greater strength as the pickup holes do not completely intersect the aluminium piece.
The lack of originality takes some of the fun out of the project, but still, with headless neck and an ergonomic and very thin body, it still distinguishes itself enough from existing guitars to allow me to feel just a little like a pioneer.
Next week I plan to visit yet another scrap metal dealer. There might be a T-beam waiting for me there.
- Two-layer Aluminium Neck
Among the drawbacks of my old T-beam designs were the lack of a truss rod or similar system to control the bow of the neck. A way to help this - but still use stock aluminium beam for the guitar - could be having a neck in two layers - an upper flat beam,...
- Future Project
Here's an instrument which I'd like to make some day: Three string blues slide guitarFor playing seatedSliding nutNo strapSpine: 30 X 12 mm aluminium rectangular beam - freely vibrating Piezo pickup on aluminium beamSliding pickup under strings-...
- To-do List - Status
I am having slow progress on the T-beam bass (remember the to-do list?). I have carved out the curves for neck and body on the aluminium beam using hacksaw and file. There is still some filing to do before I mount the mahogany sides, which will also have...
- The Desired Design Expression Of The T-beam Guitar
Very early in the design process, I've had a quite clear idea of what the T-beam guitar will look like. I expect the combination of wood and aluminium to result in a very classic look. Not classic in the guitar sense, but rather in an automotive sense....
- Making My Own T-beam
As mentioned earlier, I've had an unexpected hard time finding a suitable T-beam. There are lots of them available, but none wide enough for me to make holes for the pickups without intersecting the top flange completely. For now, I have given...