Guitar
This is a project that I am racing to complete for a customer in the San Diego area, who will be in the Boston area next week !!
The bass is a fairly modified 1973 Fender Telecaster bass, which is based on the original 1951 Fender Precision bass, but which was equipped from the factory with a huge "Fender-bucker" pickup at the neck position instead of a single coil "strat" type pickup in the middle position. The humbucker equipped Tele basses tended to suffer from a similar problem as the "mudbucker" equipped Gibson EB-0's, namely, the sound could often turn into a big wall of bottom heavy MUD. To counter this problem, many later Tele basses have an added pickup installed near the middle position - I have seen Jazz bass pickups, standard P-bass pickups and also single coil Tele bass pickups.
This particular bass initially had a Tele type pickup installed near the middle position, and then later was rerouted for a split P-bass type pickup. The bass was also refinished in gloss black.
The current owner has decided not to really "restore" this bass, but rather make it suit his playing and put a finish on it that he like better. He had no idea that the bass was originally Mocha, but he suggested the color right off the bat. As I sanded off the black finish, I was pleasantly surprised to find the remnants of a mocha finish under the black refin !!
Unfortunately, the original finish had been thinned out quite a bit as prep for the black refin, so the body still needed to be refinished, but my worries of not being able to do a translucent finish because of black paint stuck in the grain of the wood were not realized. I did try to save the finish on the edges of the body too, where it was much darker, but it was too hacked up to save, so the edges will be cleanly stripped.
The modifications that the owner wants for his Tele bass are the following:
- Alembic P-bass pickup with active electronics installed where current P-bass pickup is installed
- Dual output jacks fitted, with one output for the neck mounted humbucker and a volume control, and one output for the Alembic pickup with active volume and tone controls
- black single-ply pickguard with extended bridge side contour to cover current Tele bass pickup route
- routing for battery under guard
I have carried out the repairs and mods to the body - I took a dual output jack plate from a Rickenbacker 4001-copy project I had lurking in the basement so that a slick two jack setup could be installed. This required drilling a second hole in the edge of the Tele bass body.
The battery route was done by simply deepening part of the wiring channel to the control cavity.
Finally, the tele bass route was plugged with a maple block, even though it will be hidden under the new guard.
(UPDATE 6/6/08)
After a trial spray of the guitar body with tinted clear nitro, I realized that trying to preserve what was left of the original finish was just going to make the refinish look uneven, so I sanded the front and rear face of the body to the clear undercoat. Because the Tele bass has a simple slab body, this was a quick bit of work.
I also wet sanded the edges, though some of the original finish and uneveness remained on the body edges, where the undercoat had worn away during various rounds of refins and stripping over the year.
I mixed up a dye blend that was about 4 parts amber; 3 parts walnut and 1 part cherry. This gave a yellow tinged brown color that looked very much like the mocha instruments I had seen. This dye blend was mixed in clear nitro and then thinned down for spraying.
A number of coats were sprayed - starting with lighter less tinted coats and then building up the strength of the tinting, expecially to do the edges of the body. The finish looks good - once it dries it will be lightly wet sanded and then a few more tinted coats will be applied before clear coating the entire body several times.
(Update June 20th )
The body was finished around June 11th - and the pickguard too (though it still has its protective covering on it in this pic): test fitting the electronics, including the new dual outputs.
The rest of the bass was finished on June 13th - though I did a few more mods to the routing under the pickguard this evening while Harry and his wife Mika visited the fine Davis Square dining establishment known as "Redbones". As you can see, the final color is definitely more of a "rootbeer" - with a strong red tint - a rich color under the lights.
Harry actually was able to record with the bass this past week and reported that the Alembic pickup sounded great.
Krishna Jain
bostonguitarrepair.com
- 1976 Fender Precision Bass: Refinish To Lake Placid Blue - A Classic 60s Color!
This is a fairly straight forward refinish of a stripped Fender Precision bass body in one of Fender's classic 1960s custom colors, Lake Placid Blue. As with all of the Fender custom colors of the 60s, Lake Placid Blue was originally a car color for...
- Peavey Predator Refinish To Fender 3-color Sunburst:completed!!
This post will hopefully guide the reader through the entire process for doing an accurate 1960s style Fender 3-color sunburst finish. A customer asked me if it was possible to refinish his cream white Peavey Predator in a classic Fender-style 3-color...
- 1971 Fender Precision Bass Refinish In Sonic Blue !!!
Another Fender Precision Bass project - an older maple board P-bass that has been through some changes, namely, the body has the classic added Jazz bass pickup at the bridge route, plus a route to sink a BadAss 1 bridge into the top and of course, a route...
- G&l Asat Bass Refinish
Ok some of you may wince, because this bass had a very nicely done factory cherry sunburst finish when I started on it, but the owner simply didn't like it and wanted something brighter and louder and more ... ORANGE !!! This is a very cool bass -...
- 1960s Guild Starfire Bass Refinish
The other recent project that came my way is a stripped 1968 Guild Starfire bass, which a customer in New York asked me to refinish. We are still pondering exactly what to do with the bass - his preference is to get all remnants of the old finish off...
Guitar
1973 Telecaster Bass Re-Modification & Mocha Refinish
This is a project that I am racing to complete for a customer in the San Diego area, who will be in the Boston area next week !!
The bass is a fairly modified 1973 Fender Telecaster bass, which is based on the original 1951 Fender Precision bass, but which was equipped from the factory with a huge "Fender-bucker" pickup at the neck position instead of a single coil "strat" type pickup in the middle position. The humbucker equipped Tele basses tended to suffer from a similar problem as the "mudbucker" equipped Gibson EB-0's, namely, the sound could often turn into a big wall of bottom heavy MUD. To counter this problem, many later Tele basses have an added pickup installed near the middle position - I have seen Jazz bass pickups, standard P-bass pickups and also single coil Tele bass pickups.
This particular bass initially had a Tele type pickup installed near the middle position, and then later was rerouted for a split P-bass type pickup. The bass was also refinished in gloss black.
The current owner has decided not to really "restore" this bass, but rather make it suit his playing and put a finish on it that he like better. He had no idea that the bass was originally Mocha, but he suggested the color right off the bat. As I sanded off the black finish, I was pleasantly surprised to find the remnants of a mocha finish under the black refin !!
Unfortunately, the original finish had been thinned out quite a bit as prep for the black refin, so the body still needed to be refinished, but my worries of not being able to do a translucent finish because of black paint stuck in the grain of the wood were not realized. I did try to save the finish on the edges of the body too, where it was much darker, but it was too hacked up to save, so the edges will be cleanly stripped.
The modifications that the owner wants for his Tele bass are the following:
- Alembic P-bass pickup with active electronics installed where current P-bass pickup is installed
- Dual output jacks fitted, with one output for the neck mounted humbucker and a volume control, and one output for the Alembic pickup with active volume and tone controls
- black single-ply pickguard with extended bridge side contour to cover current Tele bass pickup route
- routing for battery under guard
I have carried out the repairs and mods to the body - I took a dual output jack plate from a Rickenbacker 4001-copy project I had lurking in the basement so that a slick two jack setup could be installed. This required drilling a second hole in the edge of the Tele bass body.
The battery route was done by simply deepening part of the wiring channel to the control cavity.
Finally, the tele bass route was plugged with a maple block, even though it will be hidden under the new guard.
(UPDATE 6/6/08)
After a trial spray of the guitar body with tinted clear nitro, I realized that trying to preserve what was left of the original finish was just going to make the refinish look uneven, so I sanded the front and rear face of the body to the clear undercoat. Because the Tele bass has a simple slab body, this was a quick bit of work.
I also wet sanded the edges, though some of the original finish and uneveness remained on the body edges, where the undercoat had worn away during various rounds of refins and stripping over the year.
I mixed up a dye blend that was about 4 parts amber; 3 parts walnut and 1 part cherry. This gave a yellow tinged brown color that looked very much like the mocha instruments I had seen. This dye blend was mixed in clear nitro and then thinned down for spraying.
A number of coats were sprayed - starting with lighter less tinted coats and then building up the strength of the tinting, expecially to do the edges of the body. The finish looks good - once it dries it will be lightly wet sanded and then a few more tinted coats will be applied before clear coating the entire body several times.
(Update June 20th )
The body was finished around June 11th - and the pickguard too (though it still has its protective covering on it in this pic): test fitting the electronics, including the new dual outputs.
The rest of the bass was finished on June 13th - though I did a few more mods to the routing under the pickguard this evening while Harry and his wife Mika visited the fine Davis Square dining establishment known as "Redbones". As you can see, the final color is definitely more of a "rootbeer" - with a strong red tint - a rich color under the lights.
Harry actually was able to record with the bass this past week and reported that the Alembic pickup sounded great.
Krishna Jain
bostonguitarrepair.com
- 1976 Fender Precision Bass: Refinish To Lake Placid Blue - A Classic 60s Color!
This is a fairly straight forward refinish of a stripped Fender Precision bass body in one of Fender's classic 1960s custom colors, Lake Placid Blue. As with all of the Fender custom colors of the 60s, Lake Placid Blue was originally a car color for...
- Peavey Predator Refinish To Fender 3-color Sunburst:completed!!
This post will hopefully guide the reader through the entire process for doing an accurate 1960s style Fender 3-color sunburst finish. A customer asked me if it was possible to refinish his cream white Peavey Predator in a classic Fender-style 3-color...
- 1971 Fender Precision Bass Refinish In Sonic Blue !!!
Another Fender Precision Bass project - an older maple board P-bass that has been through some changes, namely, the body has the classic added Jazz bass pickup at the bridge route, plus a route to sink a BadAss 1 bridge into the top and of course, a route...
- G&l Asat Bass Refinish
Ok some of you may wince, because this bass had a very nicely done factory cherry sunburst finish when I started on it, but the owner simply didn't like it and wanted something brighter and louder and more ... ORANGE !!! This is a very cool bass -...
- 1960s Guild Starfire Bass Refinish
The other recent project that came my way is a stripped 1968 Guild Starfire bass, which a customer in New York asked me to refinish. We are still pondering exactly what to do with the bass - his preference is to get all remnants of the old finish off...