Guitar
Improvements since last post:
Saddles modified -> lower action
Transparent plastic body (styrene-acrylonitrile) added.
Two screws at the bottom side of the head end holding the two layers of the neck together.
Row of neodymium magnets in M4 blind screws for current transformer pickups.
Future improvements:
String guide - pressing down on the strings before the zero fret, since they tend to rattle.
Row of magnets for current transformer pickup in bridge position.
Screw holes making the saddles lengthwise adjustable for intonation.
Piezo pickups and amplifier.
Jacks, switches, pots etc. I plan to put the electronics on the plastic body rather than on the beam itself.
- Two-layer Aluminium Neck
Among the drawbacks of my old T-beam designs were the lack of a truss rod or similar system to control the bow of the neck. A way to help this - but still use stock aluminium beam for the guitar - could be having a neck in two layers - an upper flat beam,...
- New Tuner, Bridge, Jack And Tubing
This last month I've been improving some details of the testbed guitar: The tuner has been changed to my slider-based design. It is mounted on an angled plate ensuring that the strings have sufficient break angle over the saddles. The angle also...
- Truly Headless
After postponing it a number of times, I cut off the strat headstock of my very fine Warmoth neck. That took a bit of self persuation, but I needed it headless. A brass angle bracket is holding the strings. I also made a new acrylic body. This time, I...
- To-do List
Nothing much has happened on my T-beam-bass lately. I've replaced the jack connector since the old one didn't work and clamped the connecting cable going from the jack more securely to the sliding bracket. Plus, I've borrowed a friend's...
- Stick Bass Pictures
I've made the spine of the two-string, nylon string, fretless piezo alu T-beam stick bass. Now I have to stick some wood and some piezo pickups on it. Some photos: I will shorten bot ends of the T-beam down to the tuners and string holes. Btw, these...
Guitar
Further progress on the two-layer neck
Improvements since last post:
Saddles modified -> lower action
Transparent plastic body (styrene-acrylonitrile) added.
Two screws at the bottom side of the head end holding the two layers of the neck together.
Row of neodymium magnets in M4 blind screws for current transformer pickups.
Future improvements:
String guide - pressing down on the strings before the zero fret, since they tend to rattle.
Row of magnets for current transformer pickup in bridge position.
Screw holes making the saddles lengthwise adjustable for intonation.
Piezo pickups and amplifier.
Jacks, switches, pots etc. I plan to put the electronics on the plastic body rather than on the beam itself.
- Two-layer Aluminium Neck
Among the drawbacks of my old T-beam designs were the lack of a truss rod or similar system to control the bow of the neck. A way to help this - but still use stock aluminium beam for the guitar - could be having a neck in two layers - an upper flat beam,...
- New Tuner, Bridge, Jack And Tubing
This last month I've been improving some details of the testbed guitar: The tuner has been changed to my slider-based design. It is mounted on an angled plate ensuring that the strings have sufficient break angle over the saddles. The angle also...
- Truly Headless
After postponing it a number of times, I cut off the strat headstock of my very fine Warmoth neck. That took a bit of self persuation, but I needed it headless. A brass angle bracket is holding the strings. I also made a new acrylic body. This time, I...
- To-do List
Nothing much has happened on my T-beam-bass lately. I've replaced the jack connector since the old one didn't work and clamped the connecting cable going from the jack more securely to the sliding bracket. Plus, I've borrowed a friend's...
- Stick Bass Pictures
I've made the spine of the two-string, nylon string, fretless piezo alu T-beam stick bass. Now I have to stick some wood and some piezo pickups on it. Some photos: I will shorten bot ends of the T-beam down to the tuners and string holes. Btw, these...